The hot tub is a large, salt-based spa designed to accommodate a group. It uses a propane heater to maintain temperature, multi-color LED lights, and four pumps (Filter + Pumps 2, 3, and 4) for jets and water circulation.

Controls (What Guests May Adjust)

You can adjust temperature, pump speeds, and lighting using either touchscreen:

• The touchscreen mounted on the wall to the right of the heater
• The touchscreen inside the spa near the entry door from the house

Please avoid changing any other settings.

Important: The filter pump must be running at all times while using the hot tub. If the filter pump is off, the heater will not run.

When you’re done making adjustments, please close the touchscreen cover to protect it from the elements.

Before Getting In

Please rinse feet using the nearby hose before entering, to avoid tracking dirt and sand into the tub.

Quick Cleaning (As Needed)

A long-pole, battery-powered vacuum is located on the sitting wall next to the hot tub. Use it to vacuum debris from the bottom as needed.

• The charger is in the same area next to the outlet.

While Not in Use

• Leave the filter pump running at 50% speed when the tub is not in use. This enables filtration, heating, and automatic pH adjustment/disinfection.
• Keep the hot tub covered when not in use to keep animals and debris out.
  • Open the cover by rolling it from front to back (or from the side).
  • Please do not walk on or put significant weight on the cover.
• If any sand or dirt gets in during use, please vacuum it up with the rechargeable vacuum.

Water Level